{ "timestamp": "2026-02-26 04:10:18.2995", "level": "Error", "severity": "ERROR", "message": "Fatal error encountered during command execution.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Fatal error encountered during command execution. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Fatal error encountered attempting to read the resultset. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.IOException: Unable to read data from the transport connection: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond\r\n   at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)\r\n   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)\r\n   --- End of inner exception stack trace ---\r\n   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)\r\n   at MySql.Data.MySqlClient.TimedStream.Read(Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.GetResult(Int32& affectedRow, Int64& insertedId)\r\n   at MySql.Data.MySqlClient.Driver.GetResult(Int32 statementId, Int32& affectedRows, Int64& insertedId)\r\n   at MySql.Data.MySqlClient.Driver.NextResult(Int32 statementId, Boolean force)\r\n   at MySql.Data.MySqlClient.MySqlDataReader.NextResult()\r\n   at MySql.Data.MySqlClient.MySqlDataReader.NextResult()\r\n   at MySql.Data.MySqlClient.MySqlCommand.ExecuteReader(CommandBehavior behavior)\r\n   at MySql.Data.MySqlClient.MySqlCommand.ExecuteReader(CommandBehavior behavior)\r\n   at MySql.Data.MySqlClient.MySqlCommand.ExecuteNonQuery()\r\n   at Dapper.SqlMapper.ExecuteCommand(IDbConnection cnn, CommandDefinition& command, Action`2 paramReader)\r\n   at Dapper.SqlMapper.ExecuteImpl(IDbConnection cnn, CommandDefinition& command)\r\n   at IncidentReporter.DAL.Repositories.PtwRepo.InsertActivePtwStats(PtwStatsDBO ptwStats, DateTime orgDate) in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\PtwRepo.cs:line 1519\r\n   at IncidentReporter.RenewalReminder.Helpers.PtwStatsHelper.AggregateAndInsertActivePtwStats() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\PtwStatsHelper.cs:line 118" }
{ "timestamp": "2026-02-26 04:10:18.3910", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 07:18:07.3608", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.IncidentsRepo.GetCronNotification(Int32 notificationType) in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\IncidentsRepo.cs:line 3044\r\n   at IncidentReporter.RenewalReminder.Helpers.CronHelper.CronExecution() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\CronHelper.cs:line 37" }
{ "timestamp": "2026-02-26 07:20:06.9292", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.OrganisationRepo.GetAllActiveOrganisations() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\OrganisationRepo.cs:line 4119\r\n   at IncidentReporter.RenewalReminder.Helpers.WorkInjuryReminderHelper.<WorkInjuryReminderExecution>d__9.MoveNext() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\WorkInjuryReminderHelper.cs:line 44" }
{ "timestamp": "2026-02-26 07:20:07.0552", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 07:30:01.4473", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.AssetsRepo.GetAssetsMaintenanceLogsOnCurrentDateAndHour() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\AssetsRepo.cs:line 493\r\n   at IncidentReporter.RenewalReminder.Helpers.AssetMaintenanceHelper.<AssetMaintenanceExecution>d__14.MoveNext() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\AssetMaintenanceHelper.cs:line 59" }
{ "timestamp": "2026-02-26 07:30:01.5408", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 07:49:10.7373", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.IncidentsRepo.GetCronNotification(Int32 notificationType) in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\IncidentsRepo.cs:line 3044\r\n   at IncidentReporter.RenewalReminder.Helpers.CronHelper.CronExecution() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\CronHelper.cs:line 37" }
{ "timestamp": "2026-02-26 07:50:06.6321", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.OrganisationRepo.GetAllActiveOrganisations() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\OrganisationRepo.cs:line 4119\r\n   at IncidentReporter.RenewalReminder.Helpers.WorkInjuryReminderHelper.<WorkInjuryReminderExecution>d__9.MoveNext() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\WorkInjuryReminderHelper.cs:line 44" }
{ "timestamp": "2026-02-26 07:50:06.7054", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 08:00:01.3913", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.AssetsRepo.GetAssetsMaintenanceLogsOnCurrentDateAndHour() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\AssetsRepo.cs:line 493\r\n   at IncidentReporter.RenewalReminder.Helpers.AssetMaintenanceHelper.<AssetMaintenanceExecution>d__14.MoveNext() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\AssetMaintenanceHelper.cs:line 59" }
{ "timestamp": "2026-02-26 08:00:01.4604", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 08:12:33.7833", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.IncidentsRepo.GetCronNotification(Int32 notificationType) in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\IncidentsRepo.cs:line 3044\r\n   at IncidentReporter.RenewalReminder.Helpers.CronHelper.CronExecution() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\CronHelper.cs:line 37" }
{ "timestamp": "2026-02-26 08:20:06.3336", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.OrganisationRepo.GetAllActiveOrganisations() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\OrganisationRepo.cs:line 4119\r\n   at IncidentReporter.RenewalReminder.Helpers.WorkInjuryReminderHelper.<WorkInjuryReminderExecution>d__9.MoveNext() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\WorkInjuryReminderHelper.cs:line 44" }
{ "timestamp": "2026-02-26 08:20:06.4919", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 08:30:01.5099", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.AssetsRepo.GetAssetsMaintenanceLogsOnCurrentDateAndHour() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\AssetsRepo.cs:line 493\r\n   at IncidentReporter.RenewalReminder.Helpers.AssetMaintenanceHelper.<AssetMaintenanceExecution>d__14.MoveNext() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\AssetMaintenanceHelper.cs:line 59" }
{ "timestamp": "2026-02-26 08:30:01.5787", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 08:39:47.9922", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.IncidentsRepo.GetCronNotification(Int32 notificationType) in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\IncidentsRepo.cs:line 3044\r\n   at IncidentReporter.RenewalReminder.Helpers.CronHelper.CronExecution() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\CronHelper.cs:line 37" }
{ "timestamp": "2026-02-26 08:40:44.8236", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.AssetsRepo.GetAssetsMaintenanceLogsOnCurrentDateAndHour() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\AssetsRepo.cs:line 493\r\n   at IncidentReporter.RenewalReminder.Helpers.AssetMaintenanceHelper.<AssetMaintenanceExecution>d__14.MoveNext() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\AssetMaintenanceHelper.cs:line 59" }
{ "timestamp": "2026-02-26 08:40:44.8372", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.IncidentsRepo.GetCronNotification(Int32 notificationType) in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\IncidentsRepo.cs:line 3044\r\n   at IncidentReporter.RenewalReminder.Helpers.CronHelper.CronExecution() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\CronHelper.cs:line 37" }
{ "timestamp": "2026-02-26 08:40:44.8377", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.OrganisationRepo.GetAllActiveOrganisations() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\OrganisationRepo.cs:line 4119\r\n   at IncidentReporter.RenewalReminder.Helpers.WorkInjuryReminderHelper.<WorkInjuryReminderExecution>d__9.MoveNext() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\WorkInjuryReminderHelper.cs:line 44" }
{ "timestamp": "2026-02-26 08:40:44.9473", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 08:40:44.9486", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 10:51:06.4085", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.IncidentsRepo.GetCronNotification(Int32 notificationType) in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\IncidentsRepo.cs:line 3044\r\n   at IncidentReporter.RenewalReminder.Helpers.CronHelper.CronExecution() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\CronHelper.cs:line 37" }
{ "timestamp": "2026-02-26 11:00:01.3965", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\BaseRepo.cs:line 26\r\n   at IncidentReporter.DAL.Repositories.AssetsRepo.GetAssetsMaintenanceLogsOnCurrentDateAndHour() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.DAL\\Repositories\\AssetsRepo.cs:line 493\r\n   at IncidentReporter.RenewalReminder.Helpers.AssetMaintenanceHelper.<AssetMaintenanceExecution>d__14.MoveNext() in C:\\GitLab-Runner\\builds\\27n6lYj0J\\0\\incident-reporter\\incident-reporter-api\\IncidentReporter\\IncidentReporter.RenewalReminder\\Helpers\\AssetMaintenanceHelper.cs:line 59" }
{ "timestamp": "2026-02-26 11:00:01.4718", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 11:12:33.6086", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection()\r\n   at IncidentReporter.DAL.Repositories.IncidentsRepo.GetCronNotification(Int32 notificationType)\r\n   at IncidentReporter.RenewalReminder.Helpers.CronHelper.CronExecution()" }
{ "timestamp": "2026-02-26 11:20:06.7058", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection()\r\n   at IncidentReporter.DAL.Repositories.OrganisationRepo.GetAllActiveOrganisations()\r\n   at IncidentReporter.RenewalReminder.Helpers.WorkInjuryReminderHelper.<WorkInjuryReminderExecution>d__9.MoveNext()" }
{ "timestamp": "2026-02-26 11:20:06.7677", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 11:30:01.4140", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.IOException: Unable to read data from the transport connection: An established connection was aborted by the software in your host machine. ---> System.Net.Sockets.SocketException: An established connection was aborted by the software in your host machine\r\n   at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)\r\n   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)\r\n   --- End of inner exception stack trace ---\r\n   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)\r\n   at MySql.Data.MySqlClient.TimedStream.Read(Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection()\r\n   at IncidentReporter.DAL.Repositories.AssetsRepo.GetAssetsMaintenanceLogsOnCurrentDateAndHour()\r\n   at IncidentReporter.RenewalReminder.Helpers.AssetMaintenanceHelper.<AssetMaintenanceExecution>d__14.MoveNext()" }
{ "timestamp": "2026-02-26 11:30:01.4836", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 11:33:15.6348", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.IOException: Unable to read data from the transport connection: An established connection was aborted by the software in your host machine. ---> System.Net.Sockets.SocketException: An established connection was aborted by the software in your host machine\r\n   at System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)\r\n   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)\r\n   --- End of inner exception stack trace ---\r\n   at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)\r\n   at MySql.Data.MySqlClient.TimedStream.Read(Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection()\r\n   at IncidentReporter.DAL.Repositories.IncidentsRepo.GetCronNotification(Int32 notificationType)\r\n   at IncidentReporter.RenewalReminder.Helpers.CronHelper.CronExecution()" }
{ "timestamp": "2026-02-26 11:50:04.3976", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection()\r\n   at IncidentReporter.DAL.Repositories.OrganisationRepo.GetAllActiveOrganisations()\r\n   at IncidentReporter.RenewalReminder.Helpers.DraftHealthRecordsReminderHelper.<ExecuteDraftHealthRecordsReminder>d__4.MoveNext()" }
{ "timestamp": "2026-02-26 11:50:04.3970", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection()\r\n   at IncidentReporter.DAL.Repositories.OrganisationRepo.GetAllActiveOrganisations()\r\n   at IncidentReporter.RenewalReminder.Helpers.WorkInjuryReminderHelper.<WorkInjuryReminderExecution>d__9.MoveNext()" }
{ "timestamp": "2026-02-26 11:50:04.4731", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 11:55:43.8611", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection()\r\n   at IncidentReporter.DAL.Repositories.IncidentsRepo.GetCronNotification(Int32 notificationType)\r\n   at IncidentReporter.RenewalReminder.Helpers.CronHelper.CronExecution()" }
{ "timestamp": "2026-02-26 12:00:01.4150", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection()\r\n   at IncidentReporter.DAL.Repositories.AssetsRepo.GetAssetsMaintenanceLogsOnCurrentDateAndHour()\r\n   at IncidentReporter.RenewalReminder.Helpers.AssetMaintenanceHelper.<AssetMaintenanceExecution>d__14.MoveNext()" }
{ "timestamp": "2026-02-26 12:00:01.4838", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 12:04:11.8599", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection()\r\n   at IncidentReporter.DAL.Repositories.IncidentsRepo.GetCronNotification(Int32 notificationType)\r\n   at IncidentReporter.RenewalReminder.Helpers.CronHelper.CronExecution()" }
{ "timestamp": "2026-02-26 12:04:11.8603", "level": "Error", "severity": "ERROR", "message": "Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed.", "stackTrace": "MySql.Data.MySqlClient.MySqlException (0x80004005): Authentication to host '127.0.0.1' for user 'ir365_user' using method 'mysql_native_password' failed with message: Reading from the stream has failed. ---> MySql.Data.MySqlClient.MySqlException (0x80004005): Reading from the stream has failed. ---> System.IO.EndOfStreamException: Attempted to read past the end of the stream.\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadFully(Stream stream, Byte[] buffer, Int32 offset, Int32 count)\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.LoadPacket()\r\n   at MySql.Data.MySqlClient.MySqlStream.ReadPacket()\r\n   at MySql.Data.MySqlClient.Authentication.MySqlAuthenticationPlugin.ReadPacket()\r\n   at MySql.Data.MySqlClient.NativeDriver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Open()\r\n   at MySql.Data.MySqlClient.Driver.Create(MySqlConnectionStringBuilder settings)\r\n   at MySql.Data.MySqlClient.MySqlPool.CreateNewPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetPooledConnection()\r\n   at MySql.Data.MySqlClient.MySqlPool.TryToGetDriver()\r\n   at MySql.Data.MySqlClient.MySqlPool.GetConnection()\r\n   at MySql.Data.MySqlClient.MySqlConnection.Open()\r\n   at IncidentReporter.DAL.Repositories.BaseRepo.OpenConnection()\r\n   at IncidentReporter.DAL.Repositories.OrganisationRepo.GetAllActiveOrganisations()\r\n   at IncidentReporter.RenewalReminder.Helpers.WorkInjuryReminderHelper.<WorkInjuryReminderExecution>d__9.MoveNext()" }
{ "timestamp": "2026-02-26 12:04:11.9633", "level": "Error", "severity": "ERROR" }
{ "timestamp": "2026-02-26 12:30:02.6150", "level": "Error", "severity": "ERROR", "message": "Value cannot be null.\r\nParameter name: value", "stackTrace": "System.ArgumentNullException: Value cannot be null.\r\nParameter name: value\r\n   at Newtonsoft.Json.JsonConvert.DeserializeObject(String value, Type type, JsonSerializerSettings settings)\r\n   at Newtonsoft.Json.JsonConvert.DeserializeObject[T](String value, JsonSerializerSettings settings)\r\n   at IncidentReporter.RenewalReminder.Helpers.InspectionNextDueDateReminderHelper.<GetEnableNextInspectionTrackingFlagAsync>d__5.MoveNext()\r\n--- End of stack trace from previous location where exception was thrown ---\r\n   at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)\r\n   at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)\r\n   at IncidentReporter.RenewalReminder.Helpers.InspectionNextDueDateReminderHelper.<InspectionNextDueDateReminderExecuteAsync>d__4.MoveNext()" }